Tap a crew member’s name to change crew or assign roles for this leg only.
Swap roles or seats by tapping the arrows.
Or tap a crew member’s role to pull up a list of available roles. You cannot assign both pilots to the same role.
Change to a different crew member by tapping their name, then selecting from the list of active pilots.
Crew weight is included automatically based on the data in FlightSpan™ Ops.
Note: The Legs section of the DFR will also be updated with crew or crew role changes.
Single tap a seat to add a passenger using the default weight. Tap a second time to remove the passenger.
Long tap a seat to enter a custom passenger weight, or remove the seat by selecting the Out button.
Tap an empty seat space to add a seat and standard passenger. Long tap to add the seat with no passenger, or the seat with a custom passenger.
Tap one of the quick configure buttons to change to one of the standard seat configurations.
Tap the Fill Seats button to fill all installed seats with standard weight passengers.
Tap Split Pax Load to divide the total weight of passengers evenly. If some seats are occupied, you can choose to cancel or overwrite.
Select how many seats you want to fill.
Then enter the total passenger weight and tap Done.
Existing passengers will be removed, and seats will be filled in the order set in FlightSpan™ Ops. The default order is front to back, left to right.
The default fill order can be changed in Aircraft Type EFB Preferences.
Tap the Aft button to add cargo in the aft compartment, if equipped. Max load is listed at the top.
Stowed Seats
Tap the Aft: Seats button to stow additional seats (if equipped).
If installed seats plus aft seats exceed the capacity of the aircraft, you will get a warning.
The Aft: Seats button will also turn orange.
Aircraft Equipment
Tap the Equipment button to change the installed aircraft equipment. Equipment included in the Basic Operating Weight will be on board by default. See the Editing Equipment instructions to set up aircraft equipment.
Toggle an item on or off to add or remove an item. The weight change associated with each item will be displayed in the right column, with the net change listed at the top.
Tap the Add All button to include all items; tap the Rmv All button to remove all items; and tap the Reset button to restore the default.
Custom aircraft equipment that is not included in the list can also be added. Both weight and arm are required.
Tap the Apply To button to add the selected equipment to one or more legs of the flight.
Tap All to select all legs, and Clear to remove all legs.
Tap Apply to apply the equipment changes to the current leg and all other selected legs and return to the equipment screen.
Scroll from one leg to the next using the Leg arrows. Each leg can be set independently.
Tap Done to save all changes and return to the weight and balance tab.
Tap Done And Apply To to apply changes to one or more of the legs as previously described. When you tap Done on the Apply to Legs page, the changes will be saved and you will be returned to the Weight and Balance tab.
The equipment weight change will be displayed on the equipment button, and the configuration weight and cg will also be updated.
